Calpeda META TANK 1L-250 Single Pump Packaged Booster Set

Calpeda METATANK 1L-250 Packaged Boosting System

A self-priming multi-stage pump with built-in variable speed drive & 360 ltr type AG Cat 3 insulated tank for domestic installation. MÈTA is a plug and play solution, the pump is equipped with an integrated pressure transducer, an integrated check valve and a built-in pressure vessel. The VSD controls the start and stop of the pump and allows to keep a constant pressure.

The packaged 250 litre pump and tank set, based on the Meta range of super efficient multistage, self priming pumps, raises the bar in constant pressure, variable speed pumping.

These sets are supplied fully assembled and tested, saving valuable site installation time. They are also fully wired to a switched fused spur, requiring only three onsite connections: water in to the 3/4" ball/float valve, water out to the system from the 1" isolating valve, and a single phase power connection to the pre-installed spur.

The sets are pre-programmed to the pump characteristics, but re-programming is simple and quick. The Meta L set is capable of supplying water to a typical 3 or 4 bedroom house with constant water pressure of 3 bar.

Pump Features

• integrated frequency converter
• built-in pressure vessel
• high efficiency asynchronous single-phase motor
• motor power control
• programmable re-start pressure
• no hydraulic losses due to the measuring devices
• voltage and current control
• monitoring of maximum starting current

Pump Protections

• dry-run protection
• detects the presence of air in the pump casing
• overload control and overheating motor control
• pump blockage
• power supply control
• starts per hour control
• detects small leakages in the system